Wood drying complex
Drying complex for quick drying of technical wood and obtaining firewood, which is widespread in developed countries.
Developing the drying complex, the company GreenPower took into account all the necessary parameters of the drying process of the wood. Wood drying involves a list of peculiarities, caused by the necessity of fastening the process of moisture evacuation out of splitwood.
The main difference between wood drying and sawdust drying is a higher drying agent temperaturenecessary for the increase of the speed of moisture evaporation from wood surface.
A high coefficient of efficiency. We have reached this due to the completely new method of wood drying:direct contact of wood with heat carrier moving at a fast pace. Herewith due to the fact that raw material moves in the trolleys, it is possible to use the working space of the chamber maximum efficiently.
The functions of the control of the heat carrier temperature at the outlet from the heat generator and at the inlet to the chamber lets prevent «wood cementation».
Drying chambers of the company GreenPower are equipped with a heat pump and other systems of warmth recuperation and condensation. The main principle of drying lies in functioning of the systems of ingoing and outgoing air. The heated air is headed off to the trolleys with wood and gives up heat, then it saturates with evolving from wood moisture and changes for the new portion of air.
|Number of drying chambers|
|Number of trolleys|
Subject to approval
|Effective volume of trolleys|
Subject to approval
|Productivity for dry raw material, depending on the moisture and size|
|Heat generator loading volume|
|Estimate wood consumption for heat generator|
|Drying time up to 5% of moisture|
Depends on the chamber volume, primary moisture and wood size
|Drying agent temperature|
|Heat carrier circulation pattern|
track-guided on rolls/using load-transfer device
|Material of chamber wall|
Zinc plated /
stainless steel plate
|Control and Measuring Devices and Alarm signaling-siren|
Completeness of the equipment
|Heat generator with gas-air exchanger|
Provides heating of drying agent (of air) for drying process
|Smoke exhauster DN-9|
Engine power, 11 kW,
Productivity 8000 m³/hour, weight 540 kg.
|Wood drying chamber|
Can be made using different materials of different volume.
|Chimney with insulation and deflector|
Height not less than 12 linear meters. Material – ordinary steel/corrosion-resistant plate
|Trolleys for raw material|
Can be made of different volume.
with or without wheels.