Extruder GP-350 for Pini-kay briquette production

Extruder GP-350 is designed for production of fuel briquettes pini-kay from plant waste without the use of binders.


Description

Extruder GP-350 is designed for production of fuel briquettes Pini-Kay from plant waste without the use of binders.

Equipment is designed for production of briquettes (without binders), which have wide application and are used as solid fuel in boilers, furnaces, fireplaces, grills, barbecues, etc. Raw material for this extruder is a plant biomass such as husks of sunflower, buckwheat, rice, walnut shells, olive stones, wood chips and sawdust of different wood types.

The possible shapes of the briquette

Briquettes Pini-Kay have wide application:

  • As a solid fuel in boilers, kilns, furnaces, etc.
  • As raw materials for producing charcoal of a new generation by the pyrolysis of briquette in charcoal kilns.

This extruder application allows:

  • To produce fuel with calorific value 4200-4900 kcal/kg (on the same level with mineral coal)
  • Utilize industrial waste of wood processing and production of edible and technical oils
  • Create ecological energy carrier from the renewable sources.

Raw materials

Raw material for this extruder is a plant biomass such as:

  • husks of sunflower, buckwheat, rice,
  • walnut shells,
  • olive stones,
  • straw,
  • cane,
  • wood chips and sawdust of different wood types.

Technical description

Principle of extruder operation

Raw material dried up to 8% is supplied from the loading hopper 1 by the screw feeder 2 into the feed spout 5 of the extruder operating device. Raw material is supplied from feed spout by the conic screw into the heating chamber 6, where the briquette is formed due to the heating of the lignin. The briquette is pushed from the heating chamber into the divider 7.

Length of briquette can be adjusted by dividing or trimming device.

After the briquetting crosscutter GP-350 can be applied, in this case briquettes are cut into good quality pieces of adjusted length.

Specification of the equipment

No. Parameter Value
1 Productivity, up to kg/hour 500
2 Moisture of raw material at the inlet of extruder, % 4-8
3 Fraction of source raw material, mm 2-10
4 Power consumption (including heater), kW/hour, not more 46,4
5 Heater power consumption, kW/hour, not more 7,2
6 Electricity consumption per 1 hour of operation, kW, not more 38
7 Specific electricity consumption, kW*hour/kg, not more 0,1
8 Length (including briquettes divider), mm 3800
9 Width, mm 1200
10 Height, mm 2250
11 Weight, kg 1600
12 Warranty period, months 12

 

Why do customers choose us?

  • No emissions during operation
  • Compactness and mobility of equipment
  • High performance (up to 60 tons of charcoal per month)
  • Full mechanization and automation of the operational process
  • The use of modern materials - reliable design
  • The number of screenings does not exceed 1%
  • Quality and guarantees - confirmed by
    18 years of experience on the market
  • Mobile equipment

Also buy