Technological line for activated carbon production on the basis of installation ACTIVE-60

The line is designed for production of activated carbon. Activated charcoal is used in medicine, chemical, pharmaceutical and food industries.


The line is designed for production of activated carbon. Activated carbon is used in medicine, chemical, pharmaceutical and food industries. Filters contained him are used in many modern models of devices for purification of different types of materials (water, air, etc.).

Technical Process for Activated Charcoal Production - check here.

Installation Active-60 can be used in various production lines:

1. For pyrolysis, burning, calcining, activating of:

    • Mineral coal and charcoal, in order to obtain active charcoal, dolomite (kieselguhr), etc.;
    • Wood chips, nutshell, fruit kernels and other carbonaceous bulk materials in order to obtain charcoal and active charcoal.

2. For drying, carbonization and calcination of raw materials of various types:

    • Mineral raw materials (that are used as building materials);
    • Components of dry building mixtures;
    • Products of chemical industry;
    • Other products that require similar processes.
    • Scheme of the active charcoal obtaining process from carbonaceous materials

Scheme of the active charcoal obtaining process

Active charcoal from nutshell, apple tree pellets and apple tree chips


Technical description

Elements of the technological line for active charcoal production

    1. Equipment for the raw materials preparation for pyrolysis (cutting, crushing etc.). Depending on the types of raw materials used, in agreement with the Customer.
    2. Pyrolysis installation (charcoal kiln). Depending on the parameters of raw materials used for pyrolysis and the productivity of activation line.
    3. Installation for activation Active-1.
    4. Separator. Separation into fractions 0-10 mm and 10-20 mm.
    5. Disintegrator. Crushing to a fraction 0-50 µm.


Short description of the installation ACTIVE-60

The kiln with a rotating drum chamber is a continuous device for thermal processing and activation (drying, pyrolysis, calcination, carbonization and activation) of different types of bulk materials and materials with a high porous system, in this case charcoal. Its design provides for installation of burners on liquid, gaseous and solid fuels. Due to the small size of the thermal processing chamber, consecutive use of installations is possible in order to conduct sequential processes.

Technical characteristics of the installation for activation

Raw materials and capacity
Quantity of raw materials consumedtons/day0,5 – 4,8
Capacitytons/day0,25 – 2,7
Raw material fractionmmDepends on raw materials
Personnel and operation mode
Number of workers per shiftppl2
Number of shiftspcs./h3х8, 2х12
Qualification of the personnel required secondary technical education
Estimated time of work per dayhround-the-clock, or per shift
Estimated time of work per yeardays340
Overall dimensions and infrastructure
Overall dimensionsmm7 800 х 2 500 х 3 800
The size of the site/workshop required for the gas generator operationmm12 000 х 6 000 х 5 000
Warehouse of the finished products (dry, with ventilation)m2from 50
Warehouse of raw materialsm2from 100
Amount of water required for the activation process. The water is non-returnm34 – 45
Required power at peak loadkW*h4,5
Electricity consumptionkW/month3 060


Why do customers choose us?

  • No emissions during operation
  • Compactness and mobility of equipment
  • High performance (up to 60 tons of charcoal per month)
  • Full mechanization and automation of the operational process
  • The use of modern materials - reliable design
  • The number of screenings does not exceed 1%
  • Quality and guarantees - confirmed by
    19 years of experience on the market
  • Mobile equipment

Also buy