Drying chamber for wood or charcoal briquettes

The dryer is made of heat-resistant materials and insulated with mineral wool. The dryer’s excellent heat balance is achieved by adjustable hot air channels. There is no direct contact between flue gases and charcoal briquettes.

    telegram whatsapp viber

    Description of the installation

    The furnace is equipped with an automatic drying temperature control system, which can vary between 30-200°C.  To obtain thermal energy, it is possible to use: gasoline, diesel, liquefied gas or natural gas, wood, walnut shells, electricity and heat recovery unit from BIO-KILN or with preliminary dryer for the carbonization furnaces EKKO. The dryer uses the recirculation principle. It is equipped with an electromechanical valve that releases steam when the set temperature is reached. This allows you to significantly increase the efficiency of the process and reduce fuel consumption. The production cycle is 12-24 hours, depending on the parameters of the woods or briquettes used for drying.  The dryer can be equipped with trolleys for charcoal briquettes, when it’s used for wood drying are used trolleys from EKKO carbonization furnace.

    Technical specifications

    NameDescription
    1Drying chamberManufactured from heat-resistant and resistant to aggressive environments panels with mineral wool insulation
    2Heat carrier smoke exhauster Provides heat carrier supply to the chamberPeak consumption 7,5 kW/h
    3Smoke exhauster for recirculationProvides steam extraction from the chamber.Peak consumption 2,2 kW/h
    4Temperature in the chamber30-200°С, depending on the operating mode of the dryers
    5Electric heating elements20 kW /  30 kW (for BIO-KILN 7,5kW)* 
    6Control systemAutomatic drying temperature control
    7Electrical panelSchneider/Siemens
    8Dimensions 2tons/cycleLength: 5000 mm / Width: 2300 mm / Height: 2300 mm
    9Dimensions 3tons/cycleLength: 9000 mm / Width: 2300 mm / Height: 2300 mm
    10Cycle duration12 hours, depending on the parameters of the briquette
    11Trolleys for raw materialsAdditional option in agreement with the Customer

    *When using electric energy to obtain a heat carrier, the consumption of electricity is 20 kW or 30 kW (depending on the capacity of the dryer 2 or 3 tons/cycle). When using the excess heat recovery unit from BIO-KILN, the electrical energy is used only for the electric elements of device (ventilator and control panel), same for preliminary dryer for the carbonization furnaces EKKO.

    Also buy

    Line for shisha and BBQ charcoal briquettes production
    Line for shisha and BBQ charcoal briquettes production
    More
    Excess heat recovery unit for the carbonization furnace BIO-KILN
    Excess heat recovery unit for the carbonization furnace BIO-KILN
    More
    Carbonization furnace EKKO
    Carbonization furnace EKKO
    More

    Send request