News

Mid-December was marked by the launch of our equipment for charcoal production in Brazil. At the prepared production site charcoal kilns of the CK-3 “EURO” model are installed. Photos from the launch site you can see below.   The customer used…

December at GreenPower company began with the successful launch of 2 units of EKKO-2 charcoal kilns in the city of Mora (Toledo), Spain. The production site was built specifically for the optimal operation of the charcoal kiln complex. At the moment,…

At the end of November 2019, the specialists of the GreenPower service department have launched the continuous charcoal kiln BIO-KILN in Tula, Russian Federation. This model of the kiln is designed for thermal processing of raw materials of plant origin, and…

In mid-November 2019, a specialist of the GreenPower service department launched the latest model of EKKO-2 charcoal kiln in the city of Sipakate, Guatemala. The production site was fully equipped for one unit of the charcoal kiln. Photo report from the…

In the first days of November 2019 in the city of Novokuznetsk, the Russian Federation, commissioning of the EKKO-2 model of charcoal kilns was carried out by a representative of the GreenPower service department. The photo below shows the production site,…

In October 2019, 9 units of charcoal kiln were launched for a major project in Indonesia. Earlier, in 2018, the Client has already installed and launched two units of the CK-4 EURO charcoal kiln. This year, it was decided to expand…

GreenPower Company has prepared a wonderful gift for Our Partners for the New Year 2020. From 11/22/19 to 12/31/19 GreenPower announces maximum discounts on the charcoal kilns EKKO-2 or Bio-kiln  Promotion conditions: when placing an order for one of two charcoal…

At the end of September 2019, our service department specialists launched the EKKO-2 model of charcoal kiln in the Tver Region, Russian Federation. Below you can see photos, where the production site is completely ready for launch, along with the kiln…

In mid-September 2019, our service engineers commissioned two more pieces of equipment for the charcoal production. This time, the charcoal kilns were launched in the Republic of Mari El, Russian Federation. The kilns of the EKKO-2 model, which is the latest…

In early September, our specialists from the service department modified the charcoal kiln CK-1 “EKKO” to the EKKO-2 in Busovaca, Bosnia and Herzogovina. The purpose of these works was to increase the productivity of the equipment. Photos from the production site…

Recently, at the beginning of September 2019, our specialist from the service department have launched two units of our charcoal production equipment in Orlando, USA. The model installed at the production site there is CK-1 EKKO, the previous model of the…

At the end of August 2019, we carried out another successful launch of our charcoal production equipment in Bila Tserkva, Ukraine. This time model of new generation of the BIO-KILN series – BIO-KILN-2 – was put into operation.  Our specialists of…

In mid-August 2019, we successfully launched our equipment for the production of charcoal in Tver, Russian Federation. There, the latest model of the charcoal kiln was launched – CK EKKO-2.  Our specialists of the service department launched the equipment, trained personnel,…

Recently our technical specialists have conducted the launch of the latest model of the equipment for the charcoal production by GreenPower – charcoal kiln EKKO-2. The production site is located in Kiev`s region, Ukraine. As raw materials for the charcoal production…

Recently at the regular production of the charcoal in Malaysia two additional units of CK-1 EKKO charcoal kilns were launched. Earlier last year, we installed and launched there the charcoal kiln of the previous model – CK-4 EURO. After working some…

Of course, GreenPower team is at where the action is! GreenPower took part at the world’s leading trade fair for woodworking and wood processing plant, machinery and tools – LIGNA 2019, that was held from 27 to 31 May in Messegelände…

GreenPower Company does not stand still and is constantly working on the development of the new equipment for the charcoal production and improvement of previous models of existing series – all for to offer maximum benefits to our Clients. BIO-KILN-2 is…

Today we are glad to present to you our new advanced control and measuring device and automatic control system (ACS) installed on the EKKO series of the charcoal kilns. The device is equipped with the 10-inch Touchscreen, mechanical buttons, built-in memory…